It’s so easy and convenient to use!

Sliding Bowl Cover: The sliding bowl cover allows you to expose the chamber when your ready to smoke. When you are done you can cover the bowl and be on you way. No tobacco will fall out into your pockets.

Refillable Gas Valve: Each SOLOPIPE has a refillable valve that uses any standard fitting refillable butane, ensuring that you can use your SOLOPIPE for many enjoyable years to come.

Adjustable Flame Control: Next to the mouth piece is a standard adjustable flame control. You can increase the size of the flame based on your particular needs.

Simply take a pinch of your favorite tobacco & put it into the tobacco bowl. The SoloPipe bowl is perfectly sized for one serving of your favorite tobacco.

Should you want to pack your tobacco bowl with enough tobacco for later on, simply slide the bowl cover over your loose tobacco, and it will prevent your tobacco from falling out into your pocket.

Your SoloPipe will not come filled with butane. You must fill it with butane yourself before you can use it.

Butane is available for purchase at almost any convenient store, grocery store, or tobacco store.

The butane needed to fill your SoloPipe is the same butane needed to fill a Zippo lighter, and a lot of cordless appliances.

Filling your SoloPipe is easy! On the side of your SoloPipe, there is a small hole which is where you fill your SoloPipe with butane, when needed.

• Adjust the SoloPipe flame to low (See "Adjusting Flame Height" instructions)
  
  
• Hold the SoloPipe so this hole is facing up, and then hold the butane tank vertically down onto the hole.
  
  
• Push refill nozzle firmly all the way into the SoloPipe refill valve and hold for 15-20 seconds.
  
  
• Wait until the SoloPipe returns to room temperature before igniting (5-10 minutes is recomended)
  
  
• Reset the flame height adjuster to proper position
  

Solopipe Cleaning Tool Kit:

Your SoloPipe comes with 3 tools that make up your cleaning kit: The Solostick, a cleaning brush & extra screens. These 3 tools will allow you to clean out any tobacco residue that could build up in your SoloPipe throughout time.

The Solostick:

The Solostick allows you to clean out the chamber of the mouth piece by poking the Solostick down the chamber of the pipe. Any tobacco residue that builds up in this part of the chamber can be loosened up using the Solostick to poke down the long think chamber, causing the tobacco resin to fall out & be cleaned out.

The Cleaning Brush:

The cleaning brush included in your tool kit fits perfectly into your tobacco bowl. This way any time you want to clean out any tobacco residue from your tobacco bowl, you can simply use the brush to sweep up any encrusted tobacco out of the bowl.

Extra Screens:

Your SoloPipe tool kit comes with 3 extra screens. This way, if you desire to replace the screen in the bottom of your tobacco bowl, you can simply pop out the old screen and insert a new one. Your screen will not have to be replaced often, but we're happy to provide you with the extra screens should you desire to.

Just above the mouth piece of your SoloPipe, there is a control that allows you to adjust the flame height of the flame that shoots over the tobacco bowl.

By using a small flat head screw driver, you can turn the adjustment control the right towards the (-) sign to turn your flame down, or towards the left towards the (+) sign to turn your flame up higher. All flame heights will allow enough fire to light the tobacco in your bowl, and to be used as a traditional lighter to light your cigarettes as well!

Free Carrying Pouch

Your Solopipe also comes with a poly suede carrying pouch, so you can protect your Solopipe while it is in your pocket or in your purse when you're on the go.